Standard Machine Hot Plate Welder
Category:
Hot Plate Welding Machine
Description:
Hydraulic clamp by the oil tank, power agencies, directional valves, pressure relief valve, pumping institutions, pumping institutions by the oil pump body
Key words:
Industrial switches
Standard Machine Hot Plate Welder
| Model | 600Q |
| Device Size | L1700xW1700xH2700mm |
| Upper Mold Size | 760x400mm |
| Lower Mold Size | 760x400mm |
| Hot Mold Size | 760x400mm |
| Upper and Lower Mold Opening | 985mm |
| Upper and Lower Mold Clamping Opening | 300mm |
| Upper Mold Opening | 725mm |
| Lower Mold Opening | 750mm |
| Hot Mold Stroke | 550mm |
| Temperature Control Range | 0-600℃ |
| Temperature Control Error Range | ±5℃ |
| Heating Power | 20kw |
| Slider Stroke | 500mm |
| Hot Mold Drive Mode | Precision Screw + Cylinder |
| Product Welding Force | 0-100N |
| Number of Mold Formulas | 15 Sets |
| Standard Configuration | |
| Information Description | Brand |
| Precision Guide Rail | TE |
| Mold Quick Connect Heavy Load | Aozun |
| Pneumatic Components | AIRTAC |
| Electrical Components | Omron/Schneider |
| PLC | Inovance |
| Touch Screen | Inovance |
| Temperature Controller | TOKY |
| Solid State Relay | Gute |
| Safety Door | Optional |
| Model | 600Q |
| Device Size | L1700xW1700xH2700mm |
| Upper Mold Size | 760x400mm |
| Lower Mold Size | 760x400mm |
| Hot Mold Size | 760x400mm |
| Upper and Lower Mold Opening | 985mm |
| Upper and Lower Mold Clamping Opening | 300mm |
| Upper Mold Opening | 725mm |
| Lower Mold Opening | 750mm |
| Hot Mold Stroke | 550mm |
| Temperature Control Range | 0-600℃ |
| Temperature Control Error Range | ±5℃ |
| Heating Power | 20kw |
| Slider Stroke | 500mm |
| Hot Mold Drive Mode | Precision Screw + Cylinder |
| Product Welding Force | 0-100N |
| Number of Mold Formulas | 15 Sets |
| Standard Configuration | |
| Information Description | Brand |
| Precision Guide Rail | TE |
| Mold Quick Connect Heavy Load | Aozun |
| Pneumatic Components | AIRTAC |
| Electrical Components | Omron/Schneider |
| PLC | Inovance |
| Touch Screen | Inovance |
| Temperature Controller | TOKY |
| Solid State Relay | Gute |
| Safety Door | Optional |
Vibratory friction welding machine in the automotive applications most notably embodied in the engine air intake system, interior and exterior trim parts and lights. Intake manifold are basically used are PA plus glass fibre reinforced materials, and in terms of the current process only vibration friction welding requirements can be achieved, whether it is from the airtight, burst pressure strength are other connections can not be achieved. In terms of lamps, most of the previous hot plate welding, and in recent years many manufacturers began to switch to vibration friction welding, mainly due to the vibration friction welding overflow is less (the appearance of the lamp is particularly important), welding cycle is short, greatly improving productivity, strength can also meet the requirements.
Previous page
Next page
Previous page
High-profile hot plate welding machine
Next page
Add
Xicheng Economic Development Zone, Huangyan District, Taizhou City, Zhejiang Province
Tel
